Miyoo Flip Firmware Update | How to Guide

Here we will go over how to update the Firmware on your Miyoo Flip V1 or V2.

There seems to be some confusion because the translation of how to update your firmware is inaccurate within the file itself. It is a very simple process and the directions are below. Also below you will find updates to the miyoo355_fw_20250228. (newest update as of this post)

Update Miyoo Flip Firmware

1. Download the Miyoo Flip Firmware from here
2. Extract using a program like 7zip
3. Insert your Miyoo Flip SD Card into your computer
4. Drag the extracted content from extracted folder to the root folder of your SD Card
   • miyoo355_fw.img
   • Miyoo355 Folder
   • Read Me
   • Miyoo355.7zip (unsure if this is needed but doesn’t hurt to add)
5. Safely eject and remove SD Card from computer
6. Insert SD Card into Miyoo Flip
7. Power on Miyoo Flip
8. Install Bar will show that software is updating.
9. Miyoo Flip will boot into home screen with updated software
10. Pat yourself on the back

Updates to firmware miyoo355_fw_20250228

• Update to WiFi Driver
• Addition of Bluetooth Driver
• Fixed Left and Right Button Failure
• Improved Startup Charge Efficiency
• Fixed noise heard when Headphones Mute
• Updated Joystick efficiency

Now you should have the above features and fixes. There are also some custom firmware options in the works and once they are at a state to be tested for mainstream we will take a look at them.

If you don’t already have a Miyoo Flip and are interested in getting one checkout this link for MechDIY. Save 16% use code: RetroSpecd16 at checkout.

Review of the Miyoo Flip v2 above. This could be helpful if you are trying to figure out what changes and updates were made between versions.

Check back for future updates.

GameOn

CellPhish

This article may contain affiliate links. If you use these links to purchase an item I may earn a commission which comes at no additional cost to you and supports future content.